How To Get Drawers Out Of A Dresser: A Step By Step Guide
As someone who has moved apartments several times in the past few years, I have become quite familiar with the process of disassembling furniture. One task that always stumps me, however, is figuring out how to get the drawers out of a dresser. After a bit of trial and error, I have finally figured out the best method for removing drawers from a dresser without damaging either the furniture or myself.
Step By Step Guide: How To Get Drawers Out Of A Dresser
Step 1: Remove The Contents Of The Drawer
Before attempting to remove the drawer, make sure it is empty. This will make the process easier and prevent any items from falling out and getting lost or damaged.
Step 2: Examine The Drawer Slides
Take a look at the sides of the drawer to see how it is attached to the dresser. Most drawers will either have metal slides or wooden tracks that fit into the dresser. Determine which type of attachment your drawer has before attempting to remove it.
Step 3: Release The Drawer Stops
Many dressers have stops that prevent the drawer from being pulled out too far. Look for these stops on the bottom or sides of the drawer and release them by pushing or pulling them out of the way.
Step 4: Wiggle The Drawer
Once the stops have been released, wiggle the drawer back and forth to loosen it from the dresser. Do not pull too hard or yank the drawer out, as this could cause damage to either the drawer or the dresser.
Step 5: Lift The Drawer Out Of The Dresser
Once the drawer is loose, lift it up and out of the dresser. Be sure to hold onto the sides of the drawer as you lift it, as it may be heavier than it appears.
Top 10 Tips And Ideas: How To Get Drawers Out Of A Dresser
1. Use two people to remove larger, heavier drawers. 2. If the drawer is stuck, try lubricating the slides with soap or wax. 3. Never force a drawer out of a dresser. 4. If the drawer has metal slides, look for a release lever or button to remove it. 5. Keep track of any screws or hardware that may need to be removed to release the drawer. 6. Use a flashlight to inspect the inside of the dresser for any hidden screws or stops. 7. Wear gloves to protect your hands from splinters or rough edges. 8. If the drawer is still stuck, try tapping it gently with a rubber mallet to loosen it. 9. Keep the contents of the drawer organized and labeled to make putting it back in easier. 10. Clean and polish the slides or tracks before replacing the drawer to ensure smooth movement.
Pros And Cons: How To Get Drawers Out Of A Dresser
Pros:
- Easy to do once you know how
- No special tools required
- Prevents damage to both the drawer and the dresser
Cons:
- Can be tricky if the drawer is stuck or has hidden screws
- Requires some physical effort to lift the drawer out of the dresser
- May take some trial and error to figure out the best method for your specific dresser
Personal Review And Suggestion: How To Get Drawers Out Of A Dresser
Overall, I have found that the process of removing drawers from a dresser is relatively straightforward once you know what you’re doing. The key is to be patient and gentle, and to take your time to examine the way the drawer is attached to the dresser before attempting to remove it. I would highly recommend using two people to remove larger, heavier drawers, as this makes the process much easier and safer. Additionally, keeping the contents of the drawer organized and labeled can make putting it back in much easier later on. Overall, with a little bit of practice and patience, anyone can learn how to get drawers out of a dresser without any hassle or damage.
Question & Answer
Q: Can I remove a drawer from a dresser without removing any screws?
A: It depends on the type of attachment the drawer has to the dresser. If it has metal slides, there may be a release lever or button that you can use to remove the drawer without any screws. However, if the drawer has wooden tracks, you may need to remove screws to release it.
Q: What should I do if the drawer is stuck and won’t come out?
A: Try lubricating the slides with soap or wax to loosen them up. You can also try tapping the drawer gently with a rubber mallet to loosen it. If all else fails, you may need to remove any screws or hardware that are holding the drawer in place.
FAQs
Q: Do I need any special tools to remove a drawer from a dresser?
A: No, you do not need any special tools. However, you may want to wear gloves to protect your hands from splinters or rough edges.
Q: How do I know if the drawer is attached with metal slides or wooden tracks?
A: Take a look at the sides of the drawer to see how it fits into the dresser. Metal slides will typically have a smooth, shiny surface and may have a release lever or button. Wooden tracks will be made of wood and will fit into corresponding tracks on the dresser.